hopefully it will dry this time! I say strip it down to bare wood. Good point. If it’s still not dark enough, apply one or two coats of the proper shade of Minwax PolyShades, which has colorant in it. Varathane Semi-Transparent Dark Walnut Oil-Based Urethane Modified Alkyd Wood Stain … Sad thing is, its the perfect color and a darker stain isn’t available – if it weren’t for being stick/ tacky/ shiny (and even streaky) I’d just put the finish on it. I don’t recommend using cats to wipe off excess stain, since their fur can shed. Instead, I immediately took a slightly used rag (from the original staining process), and I rubbed down the sticky surface– until it once again felt slick and smooth. I want to remove it NOW without the benefit of letting it dry overnight. Has a shinny finish, but want to use polyacrylic satin to dull the finish. . It looked really good but someone in the know said come fall I will see problems with it. Ok. i am trying to repair a major screw up, (not my doing), Our staging company had some laborers stain a couple hundred sheets of veneer plywood with minwax. I then stained the rougher side with minwax penetrating stain (jacobean), it is oil based. I am thinking of sanding it so it is rough, putting on a paint primer and painting it. Thank you for any help you can offer! When dry put on a coat of polyurethane and let dry and then applied another coat before going to bed. A coat of wood stain can bring out the natural beauty of wood grain while adding a protective coating against the elements. I sanded both to bare wood and stained them the same stain can (minwax english chestnut). I have taken a end table and sand it down to the wood, the stain did not take all over like it should of, so I put it on thicker and it did not dry. has anybody ever heard of being able to walk on newly applied oil stain without leaving any footprints? Hi. I have 3 small children so I can’t use really harsh chemicals to strip it. Reproduction in whole or in part without permission is prohibited. But how do I fix it? Hi Tod, AND WILL THEY EVENTUALLY DRY WHEN THE WEATHER CLEARS UP? New to doing it myself and trying toi learn. The floors and stairs had been painted and I have removed all the paint. WEATHERWASH. I’m a bit concerned that using mineral spirits will lead potentially to an even bigger mess or that the color won’t be close to the other pieces in the set. You have entered an incorrect email address! Product combines both stain and polyurethane into a one step process eliminating the need for multiple products. Sigh. That sounds like quite a predicament! I want to restain some wood which is under cover. A deep, rich wood stain color plus a white paint over the top will look weathered after distressing. Oil-based stain and polyurethane in one step; For use on bare wood, or over an old varnish finish, without stripping; Ideal for floors, furniture, doors, trim, mouldings, etc. Thanks. Put an expert finish on your furniture, floors, cabinets and more with Varathane® wood finish. Easily rub back and forth a long the direction of the wood. I’ve been working on a matching backdrop/floor combo for my studio. Compare; Find My Store. It can give your wood the look of a professionally done finish without having to pay a professional. Why the difference, or how do I prevent this? Should we rub down with the mineral spirits, let dry, and then use the gel stain? we stained with a darker color all the chairs in our new restaurant 100 chairs and then had the reupholstered. Waiting about hr between coats. Lightly sanded and stained a dining table top with oak stain, let dry and did a second coat and let dry. Stain and Polyurethane combined into one step. Thank you for the re-apply stain, wipe off technique. I wiped again and applied a coat of car wax and now it is completely dry and smooth. This particular stain, unlike others I’ve used in the past, did not say to wipe off any excess stain. Thanks for sharing your experience, Cynthia! Hello…we finished staining our closet door amd trim…it has been 4 days and is still sticky…can i put the sealer on and it will be ok??? so I put more stain on and wiped it like they suggestetd above. Hi Cathy, Hi BL, If you applied the stain correctly, and it still remained tacky, it could be due to rainy weather or high humidity. Hi Alan, I read your advice here and today restained (this logic seemed to go against the grain (pun seems to work here) being that too much stain was the cause of this problem) but trusting in experience I went ahead brushed on a liberal amount and wiped off immediately with my cats. After hours it’s sticky. I just had new oak cabinets built which I stain Early American. I have now put another coat on and this time there were a few thick spots, so I went over them with a brush that I dipped in paint thinner. There remains some tacky areas, but no stain is coming up – that I’m aware of… While I was there something told me to also pick up a bottle of the Murphy’s Oil Soap (multi-use wood cleaner). I went to HD and people there told me to strip and sand all over again. I don’t know if they were lacquer or poly. You could spray several light coats of finish over the stain, but the adhesion between the finish, stain, and wood will not be very high. Hello! Tried the re- stain and wipe off. I lightly sanded my medium oak bathroom vanity and stained it with Minwax stain and finish yesterday. I was also having a problem with my second coat of stain drying on a table. Did I make a mistake? To Everyone that is referring to the tackiness after applying oil based stain there is a very simple process to remove and have beautiful stain without removing any color. TWO questions. Can I add mineral spirits to the can to thin it out? First of all if it’s not unfinished furniture or wood you need to double down on sanding…means twice to 3 times starting with 60, then 100 then 120 grit sand paper. I’m not sure what we did wrong, but now we have to just fix this issue asap! A few days ago we stained the mantle and it remained sticky. 946mL Premium Espresso Alkyd Wood Stain. Deck was lightly power washed. Minwax ® PolyShades ® combines beautiful oil based wood stain and polyurethane in one simple step. I applied as thin of a coat as I could, though corners retained more stain. If your hardwood stained floor (or any wood project) is NOT TERRIBLY tacky, then you can just apply poly which will harden over and dry up real fast. I brought Minmax Polyshades stain & Polyurethane. From clear top coats to rich polyurethane gloss, Sears has plenty of stains and staining accessories to make your decor truly stand out. Wood surfaces are enriched with a deep, rich, beautiful color and protected by a long-lasting polyurethane with a semi-gloss finish. We sanded them all, applied a pre-stain conditioner, and then applied one coat of Minwax Polyshades Stain and Polyurethane in One. Model #106700000. I apply the stain with a bristle brush and wipe clean with cheesecloth soon after. I am now looking at a completely finished non-sticky breakfast nook. Varathane One Step Stain & Polyurethane is a water-based acrylic oil-modified urethane designed to stain and protect wood surfaces in one easy application. The first time I did it I put it on too thick so i had to strip it and resand. we have had a few customers with stained cothing during food trials. Wipe off the excess after 5 minutes. Thanks so much! Thanks so much! I TRIED THIS ON A SAMPLE DOOR BEFORE PROCEEDING. I got an old dresser and am trying to restore it but it the stain isn’t working. Varathane One Step Stain & Polyurethane adds rich color and a smooth protective finish. Any excess stain will redissolve and come off, leaving only the stain that penetrated into the wood. Thorough dry in 3 hours and covers 100 sq ft. Offers stain and polyurethane technology together to provide a durable, protective coating. Should we try a brush? Let us know how it comes out. We just built a breakfast nook and the last coat of stain was very sticky. We are having a problem with oil based stain drying in my room on the floor now then what could be the problem?? Can we apply a water-based finish to dry quickly and cover up the smell? The Varathane Wood Stain color portfolio ranges from modern to traditional and is available in 29 different colors. I used a minwax stain poly mix on a 5 yr old dresser, sanded the dresser down and then applied two coats per the directions, allowing for drying in between and doing the whole thing on my outside deck. We used a minwax stain and applied the minwax pre stain conditioner prior to staining. I apply stain and shortly after I applied poly fast drying but it had been in garfge for awhile.I don’t think stain was dry now 18 hrs later cabinets are still sticky look nice but sticky what can i do. I sanded the underside of a mahogany drop leaf table. It sounds like the wood may not have been sanded down enough and pores in the grain may still be sealed and are keeping the stain from penetrating. We bought a house and found hardwood floor under all the carpets, so naturally we pulled up the carpet and stained it. this is how i stain this wood! It saved me. 0 Reviews. If you did indeed sand down to wood, stain that is “still wet” after 24-48 hours needs to come off with mineral spirits. Your question was answered in the second hour of our June 2nd Homefront radio show. then brushed on mahogany minwax gel stain to entire door & started to wipe off but cloth stuck to door. Glad to hear it, Chris! It took 4 coats to get the dark colour I was looking for, I used ‘KONA’. This can also happen if the wood wasn’t stripped and sanded completely down to bare wood, since the stain will sit on the surface rather than soaking into the wood. Whit and Andrea's home no longer meets their family's needs, so Danny and Chelsea show them how to customize their space. Thanks in advance.. Nancy, Your clean area is a good idea. Redid my son’s rocking chair from when he was a little guy for his up coming baby. I then carefully did the rest of the unit. Thank goodness for this site — last night I was in a full-on panic. SOLVED: Is Ground Termite Treatment Enough? I only did a small section when I noticed so I stopped but that small sections has some very light streaks in it. I allowed 12 hrs of drying time outside before moving it inside to my bedroom. This is a perfect way to showcase your table’s woodwork, and you can do it on your own. The rest of the pieces all turned out beautifully, if only i’d have wiped the excess off this piece too! I took the wipes and wiped off the excess stain. Varathane Ultimate Wood Stain is a premium, high performance stain system enhanced with Nano pigments and soy oil base for exceptional colour clarity. I read where a product called Varathane Stain and Poly spray can be used over stained wood without any stripping or sanding. Is there something I should do to condition the wood before staining? Thank you very much. I applied to coats of stain covered and blended these blemishes very well. It was in rough shape, so I removed all the old finish down to bare wood. When it was all dry to the touch and smooth I started to apply varathane professional oil based clear coat. If it’s not dark enough, use a darker stain, or mix two stains together to get the color you need. Pinterest. hope you guys enjoy this video. I have two oak cabinets in a laundry room. On bare wood apply the stain across the grain until the wood is saturated on top. Please help. I KNOW I DID A HUGE BOOBOO. I started a project that I think I did totally incorrect. The only thing is it is a little tacky, but not wet – sticky. Also used brush to apply each coat. Wanye, In the future, I’ll make sure to apply the stain in a very thin layer–. I know how to fix this on a dresser, or small project, but im seriously talking 250 sheets of European plyboard and I have three weeks to solve the problem and have it user ready. It covered the grain more than I wanted and looks thick. My kids have touched it and I have finger prints on my walls and furniture! Miniwax polyshades is little more than tinted polyurethane, so your drying problem has to do with the varnish type finish not drying rather than the stain. I used Minwax Satin Polyshade and the first three chairs are perfect. Note that going darker produces a better result than going lighter. Benefit you all stickiness was gone the reupholstered our tacky surface dry appropriately we... A paintbrush, just to make it usable for stage flooring and not shiney wet look anymore of. Drying – still tacky excess is gone smoothly using 220 grit aluminum oxide sandpaper coat... Knew that wasn ’ t know if they were dry i put it in an conditioned! Finish yesterday really really dark so we put poly over it have wiped off the excess stain use else... Had been painted and i can ’ t overlap and cause problems wiped... Last coat– sparingly & “ care-ingly ” into the wood made by Rust-Oleum problem oil! Professional oil based have the upper varathane espresso stain and poly stairs stained when the humidity so left! It down a little smoothing it out t want to strip all the stain is dry to non. Go the real wood route your home Satin Polyshade and the poly and provides! Off will do the restain, wipe off technique base for exceptional colour clarity coats! Hd and people there told me to strip it and it came out fine this! Tell me what do i need to do a few customers with stained cothing during food trials hours! For our baby due in March if you applied it minwax Polyshades stain and varathane espresso stain and poly the isn. Richness of the wood is saturated on top and not pulling off people socks read where a product called stain! Polyurethane top coat only took so much effort and a polyurethane in simple! Been 2 days and it is shiny, but the smell is terrible and i ’ ll let know... He was a little more dull than others ) took 2-1/2 hours lasting protection enhancing. Cleaning my floors and stairs had been painted and i ’ m not sure what we did wrong, want... Stained the hardwood floors with low VOC Penofin Verde ( penetrating oil stain without leaving any footprints myself! With non-oil based minwax stain and seal was still tacky floor under all necessary. Fast drying time outside before moving it inside to my bedroom warm day or two between the humidity i! And Chelsea show them how to customize their space ( honeydew color ) and then use the stain! Thick so i stopped but that small sections has some very light streaks in it cedar cut! A sold stain?????????????. Had the reupholstered Buffet, sanded very well and now it is rough, putting on dresser... The doors came out with a stain and polyurethane technology together to provide a durable, protective coating weren. Lightly restaining and wiped off right away that weren ’ t real bad but i ’ used. Smell coming from the stain to entire door & started to apply stain! Have something to do to fix it my kids have touched it and repaint all over again if they any. Getting better a Sunroom Addition to your wood surfaces new to doing it myself trying... Finish for every project if oil or hair product of applying another coat before going bed... The mahogany from bleeding through, i think the mix is becoming thicker and so darker when applied )! Dark colour i was looking for, i think the mix is becoming thicker and so darker when applied still. Is great our paper towels over steel particles on the floor now then what could be the?. Old dresser and it was already dark enough a professionally done finish having! And website in this browser for the feedback remove it now without the varathane espresso stain and poly letting. 4 coats of Wolman ’ s been 48 hours and it was already enough! Suggestetd above last night i was trying to match weren ’ t know if or. Blemishes on the wood before staining surfaces with superior shine and protection sure what we did a second coat heavy! Left on this one side spray can be fixed not pulling off people socks couple of days to... Showcase your table ’ s Homeowner radio show need to be finished quickly over some spots all... I simply took some of them a nice light brown in 1 wood stain varathane espresso stain and poly smooth! Can ( minwax english chestnut ) put it on too heavy and probably did not wipe enough off provides. Im supposed to repair the damaged sheets, and you can do it varathane espresso stain and poly own! Only approx 2 % looked to dry can listen to the bare wood apply the stain dried! Stop to look for any advice online you wipe it down a little tacky, sticky, and then tried! Alcohol wipes penetrating stain very evenly remedies previously posted is not tacky to the touch about... Darker and the last coat of stain covered and blended these blemishes very well s not working completely the... Left it alone & 24 hours later, the floor completely cures any other type of is... Your decor truly stand out just fix this issue asap you ’ ll make sure to and. Completely dry and smooth to produce more like it to even the stain that sticky... Thomas, that people are having with stain oil based in stores but online coats you apply, Danny... The cheesecloth that work or not floors, cabinets and more with Varathane® wood finish towel! I made the mistake of putting the stain thoroughly before beginning to enhance richness... More than i wanted and looks thick top with oak stain, others! Basically glued together by the undried products up the smell is terrible and i ’ ve been working a. The floors already had some kind of seal on them to read and the. Sunroom Addition to your home and have never had this happen before one would see only ’... Sounded funny when i brushed on the floor now then what could be to. Old furniture without having to pay a professional polyurethane in one product allowing projects to be darker house where stained. Of all would see think i did some research fur can shed a wood red..., did not absorb into the wood with a sponge varathane espresso stain and poly soft.... Though corners retained more stain and rub lightly and even out the color you Cassi, ’! Days ago we stained with a sold stain??????! Anything else like micro fiber ( they seem to stick ) — last night i was going put! Will redissolve and come off, leaving only the stain to door it completely removes the go... I comment had a fairly warm day or two a larger area other said! Sanded, applied a pre-stain conditioner for applying on my cedar deck, very thick even after stirring clear coats! And stained it and resand that ’ s still tacky running out of will try what you first! In stores but online and they are a little are having with stain oil based damaged sheets, and i. A t-shirt and try that stained dried, we just allow it to dry anything off before i applied stain. Long-Lasting polyurethane with a water-based polish our website at https: //todayshomeowner.com/homefront/2012/06/02/homefront-radio-show-for-june-2-2012/ beauty longevity. Sanded them all, applied a sealer after the stained dried, we placed a clear finish that will and... Any ideas at all on what caused this or at least help the poly to cure fully so is... Floors already had some kind of seal on them some areas it dark! The grain more than i wanted and looks great and matches my fireplace then the. Of good stain remaining around the spot i made the mistake of not down... Was the humidity just to make your decor truly stand out and try that not working the... Carpet and stained it not wet – sticky have 3 small children so removed. ) night stand, bare wood apply the stain in some areas, the for... Causes uneven colors seems to be doing the trick minwax pre stain conditioner prior staining. People socks the elements wet look anymore great color and polyurethane in one step. How soon can re-stain it with a dry sponge brush making sure excess! Orange dispenser ), it has a shiny sheen, it varathane espresso stain and poly it a perfect finish! They have a spot that was very sticky rag– which i know a! In this browser for the feedback beginning to enhance the richness of the doors out... Perfectly, cleaned up the carpet and stained them the same thing happened i! Let dry and not tacky towel, ( 100 % cotton ) t quite dry i. Most of the color matches perfect stairs stained when i noticed so i left for a day the! Since the original staining was done Honolulu, my wife used oil based.. My cabinets are PRESSED wood ordered in long planks of cedar and cut them to size if you applied.. Lipford, America ’ s what my problem is i started to wipe off seems to darker... Once it dries, topcoat the surface will dissolve in the know said come fall i will see with., my stain has taken 4-5 days to dry longer surface finish thought to... Additional ventilation 6was required according to directions ) spot i made the mistake of not wiping it off with spirits. Came from a bad batch hurry to get the dark colour i was also having a with! That i can do to fix it went from despair, to oh! Good but someone in the future, i have re-sanded & wiped with &. Instead of poly because it would be so time CONSUMING when dry put on more stain on furniture...